CardServer-32TX (Flash Support)

The CardServer-32TX/AX is a highly cost-effective solution for testing and programming Intel Flash memory cards in production and engineering environments. The CardServer-32TX is a manual 32-socket system for production and engineering.
The CardServer can test/program up to 32 memory cards in parallel. All flash memory card sizes and technologies are supported. The CardServer is capable of performing any type of functional device testing, including boundary and chip mode write/verify using as data source a data file, a programmable pattern or a random function generator. Parametrically, CardServer can measure Icc currents with 2uA resolution and perform timing measurements with 2ns accuracy. All sockets have independent Vcc and Vpp drivers. The voltage sources are fully programmable with a resolution of 25mV.
The control program is a Windows* application. An intuitive and user-friendly interface allows for efficient system set-up and programming. The control and computing platform is an embedded 100-MHz Pentium(R) processor-based computer. Thus, CardServer is based on a hardware/software platform that provides the user with the ability to add or delete modular building blocks.
The CardServer can adapt from PCMCIA Cards to SIMMs or any kind of memory modules by simply swapping the appropriate socket modules on the same base platform.

For Miniature Card adapting hardware, see Tool Type category "Miniature Card-to-PC Card Adapter".